Luxury Interior Paint
Surface preparation & application
-
-
- Sand the surface with abrasive paper to remove loose paint, dust and grease.
- Wipe clean with a soft cloth and apply Indigo Cement Primer.
- After drying for 4-6 hours, apply Indigo Cement Primer.
- Sand again with abrasive paper, wipe clean, and apply another coat of Indigo Cement Primer.
- After drying for 4-6 hours, sand with fine abrasive paper & wipe clean.
- Thin 1 litre of Indigo Luxury Interior Emulsion by adding 300-400 ml water, to obtain brushable consistency. If you are using a spray gun, add about 500 ml of water.
- Apply 2 coats, maintaining an overcoat interval of 4-6 hours. A third coat may be required for dark shades.
-
Description
Give your walls a soft glow with Indigo Luxury Interior Emulsion. This pure, acrylic-based emulsion provides excellent stain resistance and has superior cleaning properties that give you spotless interiors. It also has anti-fungal and anti-mildew properties.
Related products
Acrylic Distemper
Surface preparation & application
-
- Allow newly plastered surfaces to mature for a minimum period of 6 months before painting.
- For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry.
- Apply one coat of Indigo Cement Primer.
- After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Indigo Cement primer.
- Slowly add water to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper.
- Apply 2-3 coats by brush, roller or spray with an interval of 4-6 hours between coats.
Acrylic Distemper
Surface preparation & application
-
- Allow newly plastered surfaces to mature for a minimum period of 6 months before painting.
- For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry.
- Apply one coat of Indigo Cement Primer.
- After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Indigo Cement primer.
- Slowly add water to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper.
- Apply 2-3 coats by brush, roller or spray with an interval of 4-6 hours between coats.
Multi Colour Emulsion
Surface preparation & application
-
- Seal cracks with a 1:3 mixture of cement and sand.
- Use of Indigo Polymer Putty is highly recommended.
- For newly plastered surfaces allow 3 months prior curing.
- Apply one coat of Indigo Exterior or Interior primer depending on the surface of the wall.
- Apply 2 coats of Indigo Interior Emulsion (Bronze or Silver Series) or Indigo Exterior Emulsion Gold Series in the preferred background colour.
- This will form the base on which Multi Colour Emulsion can be applied.
- Use 2 coats to provide the right opacity and finish.
- Apply 1 coat of Indigo Multi Colour Emulsion by roller, brush or spray and allow to dry for 12 hours.
- For better finish and durability, can be topcoated using Indigo Stone & Tile Clear Glossy/Matt.
Multi Colour Emulsion
Surface preparation & application
-
- Seal cracks with a 1:3 mixture of cement and sand.
- Use of Indigo Polymer Putty is highly recommended.
- For newly plastered surfaces allow 3 months prior curing.
- Apply one coat of Indigo Exterior or Interior primer depending on the surface of the wall.
- Apply 2 coats of Indigo Interior Emulsion (Bronze or Silver Series) or Indigo Exterior Emulsion Gold Series in the preferred background colour.
- This will form the base on which Multi Colour Emulsion can be applied.
- Use 2 coats to provide the right opacity and finish.
- Apply 1 coat of Indigo Multi Colour Emulsion by roller, brush or spray and allow to dry for 12 hours.
- For better finish and durability, can be topcoated using Indigo Stone & Tile Clear Glossy/Matt.
Premium Interior Paint
Surface preparation & application
-
-
- Sand the surface with abrasive paper to remove loose paint, dust and grease.
- Wipe clean with a soft cloth and apply Indigo Cement Primer.
- After drying for 4-6 hours, apply Indigo Cement Primer.
- Sand again with abrasive paper, wipe clean, and apply another coat of Indigo Cement Primer.
- After drying for 4-6 hours, sand with fine abrasive paper & wipe clean.
- Thin 1 litre of Indigo Luxury Interior Emulsion by adding 300-400 ml water, to obtain brushable consistency. If you are using a spray gun, add about 500 ml of water.
- Apply 2 coats, maintaining an overcoat interval of 4-6 hours. A third coat may be required for dark shades.
-
Premium Interior Paint
Surface preparation & application
-
-
- Sand the surface with abrasive paper to remove loose paint, dust and grease.
- Wipe clean with a soft cloth and apply Indigo Cement Primer.
- After drying for 4-6 hours, apply Indigo Cement Primer.
- Sand again with abrasive paper, wipe clean, and apply another coat of Indigo Cement Primer.
- After drying for 4-6 hours, sand with fine abrasive paper & wipe clean.
- Thin 1 litre of Indigo Luxury Interior Emulsion by adding 300-400 ml water, to obtain brushable consistency. If you are using a spray gun, add about 500 ml of water.
- Apply 2 coats, maintaining an overcoat interval of 4-6 hours. A third coat may be required for dark shades.
-
Acrylic Distemper
Surface preparation & application
-
- Allow newly plastered surfaces to mature for a minimum period of 6 months before painting.
- For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry.
- Apply one coat of Indigo Cement Primer.
- After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Indigo Cement primer.
- Slowly add water to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper.
- Apply 2-3 coats by brush, roller or spray with an interval of 4-6 hours between coats.
Acrylic Distemper
Surface preparation & application
-
- Allow newly plastered surfaces to mature for a minimum period of 6 months before painting.
- For previously painted surfaces, remove all loose and flaking particles, and rub with sand paper. Ensure that the surface is clean and dry.
- Apply one coat of Indigo Cement Primer.
- After filling up dents with a layer of Indigo Polymer Putty, apply another coat of Indigo Cement primer.
- Slowly add water to distemper paste, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg of distemper.
- Apply 2-3 coats by brush, roller or spray with an interval of 4-6 hours between coats.
Reviews
There are no reviews yet.